Skip to Content
9XX Cooled Single Mode Pump Lasers product image

9XX Cooled Single Mode Pump Lasers AC1409

A 14-pin, TE-cooled, fiber-coupled, PM, single-mode pump laser module that operates at 980 nm with output power up to 700 mW.

Full Product Description
Operating power:
Kink free power, 700 mW: Typ: 650 mW, 600 mW: Typ: 540 mW
Center wavelength:
980 nm
Request a quote

Need a product customized?

We can customize our products to fit your requirements.

Find out more

Product description

A fiber Bragg grating (FBG) precisely locks the center wavelength over extended power and temperature ranges. Achieves a high polarization extinction ratio (PER) by using advanced fiber pigtail construction techniques.

The modules are packaged using unique laser-weld packaging technology for high reliability over harsh operating conditions and are available with a fiber Bragg rating, thermoelectric cooler, thermistor, monitor photodiode, and UniDry™ getter. Our pump lasers are designed to meet the requirements outlined in Telcordia GR-468-CORE.

Key features

  • Internal cooler and thermistor
  • Fiber Bragg Grating (FBG)
  • Telcordia GR-468-CORE compliant

Specifications

NameValue
Operating chip temperatureMin: 20° C, Max: 35° C
Operating powerKink free power, 700 mW: Typ: 650 mW, 600 mW: Typ: 540 mW
Center wavelength980 nm
Wavelength toleranceWith FBG: Min: -1 nm. Max: +1 nm, Without FBG: Min: -5 nm. Max: +5 nm
Spectral shift with temperatureWith FBG: Typ: 0.01 nm / ° C
PER@ room temperature: 17 dB
Power in band@λc±1nm, p>50mW: > 90%
Threshold currentMax: 80 mA
Laser drive currentKink free power, 700 mW: Typ: 1000 mA. Max: 1200 mA. , 600 mW: Typ: 900 mA. Max: 1200 mA.
Laser forward voltageTyp: 2.0 V, Max: 2.7 V
Monitor photo diode currentMin: 0.1 mA, Max: 6.0 mA
Monitor photo diode dark current100 nA
TEC currentTamb = 25° C for Typ: 0.4 A, Tamb = 75° C for Max: 3.5 A
TEC voltage Tamb = 25° C for Typ: 0.3 V, Tamb = 75° C for Max: 3.5 V
Thermistor resistanceT = 25° C, Min: 9500 Ω, Typ: 10000 Ω, Max: 10500 Ω
Thermistor β coefficient0 / 50° C: 3892
Fiber typePM
Fiber jacket materialHytrel Acrylate
Fiber core diameterMin: 5.6 μm, Typ: 6.6 μm, Max: 7.6 μm
Fiber cladding diameterMin: 123 μm, Typ: 125 μm, Max: 127 μm
Fiber buffer diameterMin: 230 µm, Typ: 245 µm, Max: 260 µm
Pigtail lengthWith grating: Min: 1.5 m. Typ: 3 m, Without grating: Min: 1.0 m. Typ: 1.3 m
Fiber bend radiusMin: 35 mm
Fiber proof strengthMin: 100 kpsi

Pinout

PinDescription Pin Description
1TEC+14TEC-
2Thermistor13Case GND
3Monitor PD anode12NC
4Monitor PD cathode11Laser cathode
5Thermistor10Laser anode
6NC9NC
7NC8NC

Maximum Ratings

Absolute Maximum Ratings*MinMax
Storage temperature-40° C+85° C
Operating case temperature-20° C+65° C
Laser forward current1.2 A
Laser reverse voltage2.0 V
Photo diode photo current10 mA
Photo diode reverse voltage20 V
TEC current6.0 A
TEC voltage4.0 V
Thermistor current2 mA
Thermistor voltage5 V
Lead soldering time10 s
Lead soldering temperature250° C
ESD (human body model)500 V

* Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only and operation of the device at or beyond these conditions is not implied. Exposure to absolute maximum ratings for extended periods of time may affect device reliability

Order code

Guidance on how to create an order code is available in Downloads below.